CC2650_15 Datasheet, PDF (17/52 Pages) Texas Instruments – CC2650 SimpleLink Multistandard Wireless MCU

www.ti.com
CC2650
SWRS158 – FEBRUARY 2015
IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – RX (continued)
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Blocking/desensitization,
10 MHz from upper band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
64
dB
Blocking/desensitization,
20 MHz from upper band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
65
dB
Blocking/desensitization,
50 MHz from upper band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
68
dB
Blocking/desensitization,
-5 MHz from lower band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
63
dB
Blocking/desensitization,
-10 MHz from lower band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
63
dB
Blocking/desensitization,
-20 MHz from lower band edge
Wanted signal at -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
65
dB
Blocking/desensitization,
-50 MHz from lower band edge
Wanted signalat -97 dBm (3 dB above the
sensitivity level), CW jammer, PER = 1%
67
dB
Spurious emissions, 30 to 1000
MHz
Conducted measurement in a 50 Ω single-ended
load. Suitable for systems targeting compliance with
EN 300 328, EN 300 440 class 2, FCC CFR47, Part
15 and ARIB STD-T-66
–71
dBm
Spurious emissions, 1 to 12.75
GHz
Conducted measurement in a 50 Ω single-ended
load. Suitable for systems targeting compliance with
EN 300 328, EN 300 440 class 2, FCC CFR47, Part
15 and ARIB STD-T-66
–62
dBm
Frequency error tolerance
Difference between center frequency of the received
RF signal and local oscillator frequency
>200
ppm
RSSI dynamic range
100
dB
RSSI accuracy
±4
dB
5.11 IEEE 802.15.4 (Offset Q-PSK DSSS, 250 kbps) – TX
Measured on Texas Instruments CC2650EM-5XD reference design with T_c=25°C, V_DDS = 3.0 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Output power, highest setting
Delivered to a single-ended 50 Ω load through a
balun
+5
dBm
Output power, highest setting
Measured on CC2650EM-4XS, delivered to a
single-ended 50-Ω load
+2
dBm
Output power, lowest setting
Delivered to a single-ended 50 Ω load through a
balun
–21
dBm
Error vector magnitude
At maximum output power
2%
f < 1 GHz, outside restricted bands
–43
Spurious emission conducted
measurement
f < 1 GHz, restricted bands ETSI
f < 1 GHz, restricted bands FCC
f > 1 GHz, including harmonics
–65
dBm
–76
–46
Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328
and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
Copyright © 2015, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: CC2650
Specifications
17