DS90C365AMTX Datasheet, PDF (2/16 Pages) Texas Instruments – +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display Link-87.5 MHz

DS90C365A
SNLS181I – APRIL 2004 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 4 seconds)
Maximum Package Power Dissipation Capacity at 25°C, TSSOP Package
Package Derating
ESD Rating
HBM, 1.5kΩ, 100pF
EIAJ, 0Ω, 200 pF
Latch Up Tolerance at 25°C
−0.3V to +4V
−0.5V to (V_CC + 0.3)V
−0.3V to (V_CC + 0.3)V
Continuous
+150°C
−65°C to +150°C
+260°C
1.98W
16 mW/°C above +25°C
7kV
500V
±100mA
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be verified. They are not meant to imply
that the device should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Supply Noise Voltage (V_CC)
TxCLKIN frequency
Min
Nom
Max
Unit
3.0
3.3
3.6
V
−10
+25
+70
°C
200
mV_PP
18
85
MHz
Electrical Characteristics⁽¹⁾
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ ⁽²⁾
Max
Unit
LVCMOS/LVTTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_CL
Input Clamp Voltage
I_IN
Input Current
LVDS DC SPECIFICATIONS
I_CL = −18 mA
V_IN = 0.4V, 2.5V or V_CC
V_IN = GND
2.0
V_CC
V
0
0.8
V
−0.79
−1.5
V
+1.8
+10
μA
−10
0
μA
V_OD
ΔV_OD
V_OS
ΔV_OS
Differential Output Voltage
Change in V_OD between
complimentary output states
Offset Voltage ⁽³⁾
Change in V_OS between
complimentary output states
R_L = 100Ω
250
345
450
mV
35
mV
1.13
1.25
1.38
V
35
mV
I_OS
Output Short Circuit Current
V_OUT = 0V, R_L = 100Ω
I_OZ
Output TRI-STATE^® Current
Power Down = 0V,
V_OUT = 0V or V _CC
−3.5
−5
mA
±1
±10
μA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V_OD and ΔV_OD).
(2) Typical values are given for V_CC = 3.3V and T_A = +25°C unless specified otherwise.
(3) V_OS previously referred as V_CM.
2
Submit Documentation Feedback
Product Folder Links: DS90C365A
Copyright © 2004–2013, Texas Instruments Incorporated