AMC1203_15 Datasheet, PDF (2/29 Pages) Texas Instruments – 1-Bit, 10MHz, 2nd-Order, Isolated Delta-Sigma Modulator

AMC1203
SBAS427C – FEBRUARY 2008 – REVISED JUNE 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PRODUCT
AMC1203
AMC1203B
PACKAGE-LEAD
SOP-8 Gull-Wing
SOP-8
SOIC-16
SOP-8 Gull-Wing
SOP-8
SOIC-16
PACKAGE/ORDERING INFORMATION⁽¹⁾
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT MEDIA,
QUANTITY
DUB
–40°C to +105°C
AMC1203
AMC1203DUB
AMC1203DUBR
Tube, 50
Tape and Reel, 350
PSA
–40°C to +105°C
1203
AMC1203PSA
Tube, 95
AMC1203PSAR Tape and Reel, 2000
AMC1203DW
Tube, 40
DW
–40°C to +105°C
AMC1203
AMC1203DWR Tape ad Reel, 2000
DUB
–40°C to +105°C
AMC1203
AMC1203BDUB
Tube, 50
AMC1203BDUBR Tape and Reel, 350
PSA
–40°C to +105°C
1203
AMC1203BPSA
Tube, 95
AMC1203BPSAR Tape and Reel, 2000
AMC1203BDW
Tube, 40
DW
–40°C to +105°C
AMC1203
AMC1203BDWR Tape and Reel, 2000
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or visit the
device product folder on www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Over operating free-air temperature range, unless otherwise noted.
PARAMETER
Supply voltage, V_DD1 to GND1 or V_DD2 to GND2
Analog input voltage at V_IN+, V_IN–
Input current to any pin except supply pins
Continuous total power dissipation
Maximum junction temperature, T_J
Human body model (HBM)
JEDEC standard 22, test method A114-C.01
Electrostatic discharge (ESD), all pins
Charged device Model (CDM)
JEDEC standard 22, test method C101
Machine Model (MM)
JEDEC standard 22, test method A115A
AMC1203
UNIT
–0.3 to +6
V
GND1 – 0.3 to V_DD1 + 0.3
V
±10
mA
See Dissipation Ratings Table
+150
°C
±3000
V
±1500
V
±200
V
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under the Recommended Operating
Conditions is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
2
Copyright © 2008–2011, Texas Instruments Incorporated