LP3878-ADJ_15 Datasheet, PDF (19/25 Pages) Texas Instruments – Micropower 800-mA Low-Noise

PACKAGE OPTION ADDENDUM
www.ti.com
9-Feb-2015
PACKAGING INFORMATION
Orderable Device
LP3878MR-ADJ
Status
(1)
NRND
Package Type Package Pins Package
Drawing
Qty
SO PowerPAD DDA 8
95
Eco Plan
(2)
TBD
Lead/Ball Finish
(6)
Call TI
MSL Peak Temp
(3)
Call TI
Op Temp (°C)
LP3878MR-ADJ/NOPB
LP3878MRX-ADJ/NOPB
LP3878SD-ADJ/NOPB
LP3878SDX-ADJ/NOPB
ACTIVE SO PowerPAD DDA
ACTIVE SO PowerPAD DDA
ACTIVE
WSON
NGT
ACTIVE
WSON
NGT
8
95 Green (RoHS
& no Sb/Br)
CU SN
Level-3-260C-168 HR
8 2500 Green (RoHS
& no Sb/Br)
CU SN
Level-3-260C-168 HR
8 1000 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM
& no Sb/Br)
8 4500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM
& no Sb/Br)
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Device Marking
(4/5)
3878
MRADJ
3878
MRADJ
3878
MRADJ
3878ADJ
3878ADJ
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
(4) _{There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.}
(5) _{Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation}
of the previous line and the two combined represent the entire Device Marking for that device.
Samples
Addendum-Page 1