TMS320C6748 Datasheet, PDF (143/242 Pages) Texas Instruments – Fixed/Floating-Point DSP

www.ti.com
NO.
25 t_{d(SCSL_SPC)S}
26 t_{d(SPC_SCSH)S}
27 t_{ena(SCSL_SOMI)S}
28 t_{dis(SCSH_SOMI)S}
TMS320C6748 Fixed/Floating-Point DSP
SPRS590 – JUNE 2009
Table 6-65. Additional SPI0 Slave Timings, 4-Pin Chip Select Option ^(1)(2)(3)
PARAMETER
Required delay from SPI0_SCS asserted at slave to first SPI0_CLK edge at slave.
Polarity = 0, Phase = 0,
from SPI0_CLK falling
Required delay from final SPI0_CLK edge before SPI0_SCS is
deasserted.
Polarity = 0, Phase = 1,
from SPI0_CLK falling
Polarity = 1, Phase = 0,
from SPI0_CLK rising
Polarity = 1, Phase = 1,
from SPI0_CLK rising
Delay from master asserting SPI0_SCS to slave driving SPI0_SOMI valid
Delay from master deasserting SPI0_SCS to slave 3-stating SPI0_SOMI
1.2V
MIN MAX
P + 1.5
1.1V
MIN MAX
P + 1.5
1.0V
MIN MAX
P + 1.5
0.5M+P+4
0.5M+P+4
0.5M+P+5
P+4
P+4
P+5
0.5M+P+4
0.5M+P+4
0.5M+P+5
P+4
P+4
P+5
P+17.
5
P+17.
5
P+20
P+20
P+27
P+27
UNIT
ns
ns
ns
ns
(1) These parameters are in addition to the general timings for SPI slave modes (Table 6-60).
(2) P = SYSCLK2 period; M = t_c(SPC)M (SPI master bit clock period)
(3) Figure shows only Polarity = 0, Phase = 0 as an example. Table gives parameters for all four slave clocking modes.
Submit Documentation Feedback
Peripheral Information and Electrical Specifications 143