English
Language : 

CC2630_15 Datasheet, PDF (14/50 Pages) Texas Instruments – CC2630 SimpleLink 6LoWPAN / ZigBee Wireless MCU
◁
CC2630
SWRS177 – FEBRUARY 2015
www.ti.com
5.5 Electrical Characteristics
Measured on Texas Instruments CC2650EM-5XD reference design with Tc=25°C, VDDS = 3.0 V with internal DC-DC
converter, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
Icore
Core current consumption
Reset. RESET_N pin asserted
Shutdown. No clocks running, no retention
100
nA
150
Standby. With RTC, CPU, RAM and (partial) register
retention. RCOSC_LF
1
Standby. With RTC, CPU, RAM and (partial) register
retention. XOSC_LF
1.2
Standby. With Cache, RTC, CPU, RAM and (partial)
register retention. RCOSC_LF
2.5
µA
Standby. With Cache, RTC, CPU, RAM and (partial)
register retention. XOSC_LF
2.7
Idle. Supply Systems and RAM powered.
550
Active. Core running CoreMark
1.45 mA
+
31
µA/MHz
Radio RX (1)
5.9
Radio RX(2)
Radio TX, 0 dBm output power(1)
6.1
mA
6.1
Radio TX, 5 dBm output power(2)
9.1
Iperi
Peripheral Current Consumption (Adds to core current Icore for each peripheral unit activated)(3)
Peripheral power domain
Delta current with domain enabled
20
µA
Serial power domain
Delta current with domain enabled
13
µA
RF Core
Delta current with power domain enabled, clock
enabled, RF Core Idle
237
µA
µDMA
Delta current with clock enabled, module idle
130
µA
Timers
I2C
Delta current with clock enabled, module idle
Delta current with clock enabled, module idle
113
µA
12
µA
I2S
Delta current with clock enabled, module idle
36
µA
SSI
Delta current with clock enabled, module idle
93
µA
UART
Delta current with clock enabled, module idle
164
µA
(1) Single-ended RF mode optimized for size and power consumption. Measured on CC2650EM-4XS
(2) Differential RF mode optimized for RF performance. Measured on CC2650EM-5XD
(3) Iperi not supported in Standby and Shutdown
14
Specifications
Submit Documentation Feedback
Product Folder Links: CC2630
Copyright © 2015, Texas Instruments Incorporated
 ▷