SMJ320MCM42C Datasheet, PDF (11/16 Pages) Texas Instruments – DUAL SMJ320C40 MULTICHIP MODULE

SMJ320MCM42C, SMJ320MCM42D
DUAL SMJ320C40 MULTICHIP MODULE
SGKS001B – JULY 1997 – REVISED FEBRUARY 2000
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^†
Supply voltage range, V_CC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 7 V
Voltage range on any terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 7 V
Output voltage range, V_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 7 V
Operating free-air temperature range (commercial [L version]), T_A . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
(military [M version]), T_A . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Junction temperature, T_J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to VSS.
recommended operating conditions
VCC Supply voltage
VIH High-level input voltage
VIL Low-level input voltage
IOH High-level output current
IOL Low-level output current
TA
Operating free-air temperature range
’42-33
’42-40
CLKIN_COMM
CSTRBx, CRDYx, CREQx, CACKx
All others
L version
M version
MIN
4.5
4.75
2.6
2.2
2
– 0.3
0
– 55
MAX
5.5
5.25
VCC + 0.3
VCC + 0.3
VCC + 0.3
0.8
– 300
2
70
125
UNIT
V
V
V
µA
mA
°C
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (see Note 2)
PARAMETER
TEST CONDITIONS†
MIN TYP MAX UNIT
VOH
VOL
ICC
High-level output voltage
Low-level output voltage
Supply current
’42D
’42C
VCC = MIN, IOH = MAX
VCC = MIN, IOL = MAX
VCC = MAX
2.4
3
V
0.3 0.6 V
0.7 1.1
A
0.8 1.5
IZ
3-state current
VI = VSS to VCC
– 20
II
Input current
VI = VSS to VCC
– 10
II2
Input current, COMM signal (see Note 3)
VI = VSS to VCC
– 20
IIP
Input current, internal pullup (see Note 4)
VI = VSS to VCC
– 400
IIP2
Input current, dual internal pullup (see Note 5)
VI = VSS to VCC
– 800
IIC
Input current, CLKIN_COMM
VI = VSS to VCC
– 60
† _{For conditions shown as MIN / MAX, use the appropriate value specified under recommended operating conditions.}
NOTES: 2. Electrical characteristics are calculated algebraically from the SMJ320C40 data sheet limits.
3. Includes signals EMU0_COMM, EMU1_COMM, and RESET_COMM
4. Applies to TDI_C40_#1
5. Includes signals TCK_COMM, TMS_COMM, and TRST_COMM
20 µA
10 µA
20 µA
30 µA
60 µA
60 µA
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
11