TLE2141-EP Datasheet, PDF (10/22 Pages) Texas Instruments – Excalibur™ LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIER

FUNCTIONAL DESCRIPTION
FUNCTIONAL PIN DESCRIPTION
FUNCTIONAL DESCRIPTION
FUNCTIONAL PIN DESCRIPTION
VCC
VCC is the power input terminal for the IC. A 0.1μF bypass
capacitor in series with a 4.7Ω resistor to ground should be
connected as close as possible to this pin to provide noise
immunity.
IN
IN is the video signal input terminal.
GND
GND is the ground terminal for the IC.
RFREQ
The operating bandwidth of the IC is set by the value of the
resistor between this terminal and ground. By selecting a
value for the RFREQ resistor between 9.0kΩ and 108kΩ,the
bandwidth can be set for video applications ranging from
1080p to 480i.
OUT
OUT is the video signal output terminal.
EN
EN is a logic level enable input for the IC. EN = 1 turns the
IC on, and EN = 0 turns it off.
34830
10
Analog Integrated Circuit Device Data
Freescale Semiconductor