TMS320F206_06 Datasheet, PDF (1/58 Pages) Texas Instruments – DIGITAL SIGNAL PROCESSOR

TMS320F206
DIGITAL SIGNAL PROCESSOR
D High-Performance Static CMOS Technology
D Includes the T320C2xLP Core CPU
D TMS320F206 is a Member of the
TMS320C20x Generation, Which Also
Includes the TMS320C203, and
TMS320C209 Devices
D Instruction-Cycle Time 50 ns @ 5 V
D Source Code Compatible With TMS320C25
D Upwardly Code-Compatible With
TMS320C5x Devices
D Three External Interrupts
D TMS320F206 Integrated Memory:
– 544 × 16 Words of On-Chip Dual-Access
Data RAM
– 32K × 16 Words of On-Chip Flash
Memory (EEPROM)
– 4K × 16 Words of On-Chip Single-Access
Program/ Data RAM
D 224K × 16-Bit Maximum Addressable
External Memory Space
– 64K Program
– 64K Data
– 64K Input/Output (I/O)
– 32K Global
SPRS050A – NOVEMBER 1996 – REVISED APRIL 1998
D 32-Bit ALU/Accumulator
D 16 × 16-Bit Multiplier With a 32-Bit Product
D Block Moves from Data and Program
Space
D TMS320F206 Peripherals:
– On-Chip 16-Bit Timer
– On-Chip Software-Programmable
Wait-State (0 to 7) Generator
– On-Chip Oscillator
– On-Chip Phase-Locked Loop (PLL)
– Six General-Purpose I/O Pins
– Full-Duplex Asynchronous Serial Port
(UART)
– Enhanced Synchronous Serial Port
(ESSP) With Four-Level-Deep FIFOs
D Input Clock Options
– Options – Multiply-by-One, -Two, or -Four
and Divide-by-Two
D Support of Hardware Wait States
D Power Down IDLE Mode
D IEEE 1149.1^†-Compatible Scan-Based
Emulation
D 100-Pin Thin Quad Flat Package (TQFP)
(PZ Suffix)
description
The TMS320F206 Texas Instruments (TI™) digital signal processor (DSP) is fabricated with static CMOS
integrated-circuit technology, and the architectural design is based upon that of the TMS320C20x series,
optimized for low-power operation. The combination of advanced Harvard architecture, on-chip peripherals,
on-chip memory, and a highly specialized instruction set is the basis of the operational flexibility and speed of
the ’F206.
The ’F206 offers these advantages:
 D 32K 16 words on-chip flash EEPROM reduces system cost and facilitates prototyping
D Enhanced TMS320 architectural design for increased performance and versatility
D Advanced integrated-circuit processing technology for increased performance
D ’F206 devices are pin- and code-compatible with ’C203 devices.
D Source code for the ’F206 DSP is software-compatible with the ’C1x and ’C2x DSPs and is upwardly
compatible with fifth-generation DSPs (’C5x)
D New static-design techniques for minimizing power consumption and increasing radiation tolerance
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TI is a trademark of Texas Instruments Incorporated.
† _{IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.}
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 1998, Texas Instruments Incorporated
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
1