THS6007 Datasheet, PDF (1/36 Pages) Texas Instruments – DUAL DIFFERENTIAL LINE DRIVERS AND LOW-POWER RECEIVERS

THS6007
DUAL DIFFERENTIAL LINE DRIVERS AND LOW-POWER RECEIVERS
D ADSL Differential Line Driver and Receiver
D Driver Features
– 140 MHz Bandwidth (–3dB) With
25-Ω Load
– 1300 V/µs Slew Rate, G = 5
– 400 mA Output Current Minimum Into
25-Ω Load
– –72 dBc 3rd Order Harmonic Distortion
at f = 1 MHz, 25-Ω Load, and 20 V_O(PP)
D Receiver Features
– 175 MHz Bandwidth (–3dB)
– 230 V/µs Slew Rate
– – 79 dBc Total Harmonic Distortion at
f = 1 MHz, R_L 1 kΩ
– Quiescent Current = 3.4 mA Per Channel
D Wide Supply Range ± 4.5 V to ±16 V
D Available in the PowerPAD™ Package
R1 OUT
R1 IN–
R1 IN+
NC
NC
R V_CC–
D V_CC–
D1 OUT
NC
D V_CC+
D1 IN+
D1 IN–
NC
NC
SLOS334– DECEMBER 2000
PWP PACKAGE
(TOP VIEW)
1
28
R V_CC+
2
27
R2 OUT
3
26
R2 IN–
4
25
R2 IN+
5
24
NC
6
23
NC
7
22
D V_CC–
8
21
D2 OUT
9
20
NC
10
19
D V_CC+
11
18
D2 IN+
12
17
D2 IN–
13
16
NC
14
15
NC
NC – No internal connection
description
The THS6007 contains two high-current, high-speed drivers and two low-power, high-speed receivers. These
drivers and receivers can be configured differentially for driving and receiving signals over low-impedance lines.
The THS6007 is ideally suited for asymmetrical digital subscriber line (ADSL) applications where it supports
the high-peak voltage and current requirements of that application. The drivers are current feedback amplifiers
designed for the high slew rates necessary to support low total harmonic distortion (THD) in ADSL applications.
The receivers are traditional voltage feedback amplifiers designed for maximum flexibility while consuming only
3.4 mA per channel quiescent current. Separate power supply connections for each driver and both receivers
are provided to minimize crosstalk.
The THS6007 is packaged in the patented PowerPAD™ package. This package provides outstanding thermal
characteristics in a small footprint package, which is fully compatible with automated surface-mount assembly
procedures. The exposed thermal pad on the underside of the package is in direct contact with the die. By simply
soldering the pad to the PWB copper and using other thermal outlets, the heat is conducted away from the
junction.
AVAILABLE OPTIONS
PACKAGED DEVICE
TA
PowerPAD™ TSSOP†
EVALUATION
MODULE
(PWP)
0°C to 70°C
THS6007CPWP
THS6007EVM
– 40°C to 85°C
THS6007IPWP
† _{The PWP packages are available taped and reeled. Add an R suffix to the device type (i.e.,}
THS6007PWPR)
CAUTION: The THS6007 provides ESD protection circuitry. However, permanent damage can still occur if this device is subjected
to high-energy electrostatic discharges. Proper ESD precautions are recommended to avoid any performance degradation or loss
of functionality.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1