THS4511 Datasheet, PDF (1/25 Pages) Texas Instruments – WIDEBAND, LOW NOISE, LOW DISTORTION FULLY DIFFERENTIAL AMPLIFIER

THS4511
www.ti.com
SLOS471 – SEPTEMBER 2005
WIDEBAND, LOW NOISE, LOW DISTORTION FULLY DIFFERENTIAL AMPLIFIER
FEATURES
• Fully Differential Architecture
• Common-Mode Input Range Includes
the Negative Rail
• Unity Gain Stable
• Bandwidth: 1.6 GHz (Gain = 0 dB)
• Slew Rate: 4900 V/µs
• 0.1% Settling Time: 3.3 ns
• HD₂: –72 dBc at 70 MHz
• HD₃: –87 dBc at 70 MHz
• OIP₂: 76 dBm at 70 MHz
• OIP₃: 42 dBm at 70 MHz
• Input Voltage Noise: 2 nV/√Hz (f > 10 MHz)
• Noise Figure: 21.8 dB (50 Ω System, G = 6 dB)
• Output Common-Mode Control
• 5-V Power Supply Current: 39.2 mA
• Power-Down Capability: 0.65 mA
APPLICATIONS
• 5-V Data-Acquisition Systems
• High Linearity ADC Amplifier
• Wireless Communication
• Medical Imaging
• Test and Measurement
RELATED PRODUCTS
Device
Min. Gain Common Mode Range
of Input*
THS4508
6 dB
–0.3V to 2.3V
THS4509
6 dB
0.75V to 4.25V
THS4511
0 dB
–0.3V to 2.3V
THS4513
0 dB
0.75V to 4.25V
*Note: Assumes a 5V single-ended power supply
DESCRIPTION
The THS4511 is a wideband, fully-differential oper-
ational amplifier designed for single-supply 5-V
data-acquisition systems. It has very low noise at 2
nV/√Hz, and extremely low harmonic distortion of –72
dBc HD₂ and –87 dBc HD₃ at 70 MHz with 2 Vpp,
G = 0 dB, and 200-Ω load. Slew rate is very high at
4900 Vµs and with settling time of 3.3 ns to 0.1% (2
V step) it is ideal for pulsed applications. It is
designed for minimum gain of 0 dB.
To allow for dc coupling to ADCs, its unique output
common-mode control circuit maintains the output
common-mode voltage within 5-mV offset (typical)
from the set voltage, when set within ±0.5 V of
mid-supply. The common-mode set point is set to
mid-supply by internal circuitry, which may be
over-driven from an external source.
The THS4511 is a high-performance amplifier that
has been optimized for use in 5-V single supply data
acquisition systems. The output has been optimized
for best performance with its common-mode voltages
set to mid supply, and the input has been optimized
for performance over a wide range of common-mode
input voltages. High performance at a low
power-supply voltage enables single-supply 5-V
data-acquisition systems while minimizing component
count.
The THS4511 is offered in a Quad 16-pin leadless
QFN package (RGT), and is characterized for oper-
ation over the full industrial temperature range from
–40°C to 85°C.
Video Buffer, Single-Ended to Differential
Video Source
R_S = 75 W V_IN
175 W
V_Signal
130 W
75 W
175 W
130 W
348 W
V_S+ = 5 V
THS4511
V_S-
V_CM = 2.5 V
R_O
-
R_O ^VOD
+
348 W
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated