DLPC350 Datasheet, PDF (1/50 Pages) Texas Instruments – DLP Digital Controller for the DLP4500 DMD

DLPC350
www.ti.com
DLPS029A – APRIL 2013 – REVISED MAY 2013
DLP® Digital Controller for the DLP4500 DMD
Check for Samples: DLPC350
FEATURES
1
•2 Supports Reliable Operation of the DLP4500
DMD
• Two Types of Input Interfaces
– YUV, YCrCb, or RGB data format
– 8, 9, or 10 bits per color
– Pixel Clock support up to 150 MHz
– Single channel, LVDS Flat-Panel Display
(FPD-Link) compatible Input Interface
– Supports sources up to a 90 MHz
effective pixel clock rate
– Four demodulated pixel mapped modes
supported for 8, 9, 10 YUV, YCrCb, or
RGB formatted input
• Two Modes of Operation
– Structured Light Mode
– Pixel Accurate Mode with no video
processing
– One-to-One Mapping of Input Data to
Micromirrors
– 1-Bit Binary Pattern Rates up to 4225 Hz
– 8-Bit Gray Pattern Rates up to 120 Hz
– Video Projection Mode
– Programmable color coordinate
adjustment
– Programmable color space conversion
– Programmable Degamma
– Spatial-Temporal Multiplexing
(Dithering)
• Dynamic and Anamorphic Scaling
• Splash Screen Display support
• Supports 10 Hz to 120 Hz frame rates
• High Speed, Double-Data-Rate DMD Interface
• Microprocessor Peripherals
– Programmable PWM and Capture timers
– Two I²C Ports
– One USB 1.1 Slave Port
– 32 kB of internal RAM
– Dedicated LED PWM generators
• Integrated Clock Generation Circuitry
– Operates on a single 32 MHz Crystal
– Integrated spread spectrum clocking
– Parallel Flash for microprocessor
• System Control:
– Integrated DMD Power and Reset Driver
Control
– DMD Horizontal and Vertical Image Flip
• JTAG Boundary Scan Test support
• 419 Pin Plastic Ball Grid Array package
APPLICATIONS
• Machine Vision
• Industrial Inspection
• 3D Scanning
• 3D Optical Metrology
• Automated Fingerprint Identification
• Face Recognition
• Augmented Reality
• Interactive Display
• Information Overlay
• Spectroscopy
• Chemical Analyzers
• Medical Instruments
• Photo-Stimulation
• Virtual Gauges
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DLP is a registered trademark of Texas Insturments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated