80C154 Datasheet, PDF (17/24 Pages) TEMIC Semiconductors – CMOS 0 to 36 MHz Single Chip 8-bit Microcontroller

80C154/83C154
Absolute Maximum Ratings*
Ambient Temperature Under Bias :
C = Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
I = Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . –65°C to + 150°C
Voltage on VCC to VSS . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to + 7 V
Voltage on Any Pin to VSS . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W
** This value is based on the maximum allowable die temperature and
the thermal resistance of the package
* Notice
Stresses at or above those listed under “ Absolute Maximum Ratings”
may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions may affect
device reliability.
DC Parameters
TA = 0°C to 70°C ; Vcc = 2.7 V to 5.5 V ; Vss = 0 V ; F = 0 to 16 MHz
TA = –40°C to 85°C ; Vcc = 2.7 V to 5.5 V
SYMBOL
VIL
VIH
PARAMETER
Input Low Voltage
Input High Voltage (Except XTAL and RST)
VIH1
VIH2
VPD
VOL
VOL1
VOH
VOH1
IIL
ILI
ITL
IPD
RRST
CIO
Input High Voltage to XTAL1
Input High Voltage to RST for Reset
Power Down Voltage to Vcc in PD Mode
Output Low Voltage (Ports 1, 2, 3)
Output Low Voltage Port 0, ALE, PSEN
Output High Voltage Ports 1, 2, 3
Output High Voltage (Port 0 in External Bus
Mode), ALE, PSEN
Logical 0 Input Current Ports 1, 2, 3
Input Leakage Current
Logical 1 to 0 Transition Current
(Ports 1, 2, 3)
Power Down Current
RST Pulldown Resistor
Capacitance of I/O Buffer
MIN
– 0.5
0.2 VCC
+ 1.4 V
0.7 VCC
0.7 VCC
2.0
0.9 Vcc
0.9 Vcc
MAX UNIT
0.2 VCC – 0.1 V
VCC + 0.5 V
TEST CONDITIONS
VCC + 0.5
VCC + 0.5
6.0
0.45
0.45
V
V
V
V IOL = 0.8 mA (note 2)
V IOL = 1.6 mA (note 2)
V IOH = – 10 µA
V IOH = – 40 µA
– 50
± 10
– 650
µA Vin = 0.45 V
µA 0.45 < Vin < VCC
µA Vin = 2.0 V
50
µA VCC = 2 V to 5.5 V (note 1)
50
200
kΩ
10
pF fc = 1 MHz, T_A = 25_C
Maximum Icc (mA)
OPERATING (NOTE 1)
FREQUENCY/Vcc
2.7 V
3V
3.3 V
5.5 V
1 MHz
0.8 mA
1 mA
1.1 mA
1.8 mA
6 MHz
4 mA
5 mA
6 mA
10 mA
12 MHz
8 mA
10 mA
12 mA
16 MHz
10 mA
12 mA
14 mA
Freq > 12 MHz (Vcc = 5.5 V)
Icc (mA) = 1.3 × Freq (MHz) + 4.5
Icc Idle (mA) = 0.36 × Freq (MHz) + 2.7
2.7 V
400 µA
1.5 mA
2.5 mA
3 mA
IDLE (NOTE 1)
3V
3.3 V
500 µA
600 µA
1.7 mA
2 mA
3 mA
3.5 mA
3.8 mA
4.5 mA
5.5 V
1 mA
4 mA
MATRA MHS
17
Rev.F (14 Jan. 97)