English
Language : 

HDO4000 Datasheet, PDF (15/16 Pages) Teledyne Technologies Incorporated – High Definition Oscilloscopes
specifications
Probes
Standard Probes
Probing System
HDO4022
HDO4024
HDO4032
HDO4034
HDO4054
One PP017 (5mm) per channel
One PP018(5mm) per channel
BNC and Teledyne LeCroy ProBus for Active voltage, current and differential probes
HDO4104
Display System
Display Size
Display Resolution
Connectivity
Ethernet Port
USB Host Ports
USB Device Port
GPIB Port (Optional)
External Monitor Port
Remote Control
Processor/CPU
Type
Processor Memory
Operating System
Disk Type
12.1” Wide TFT-LCD Touch-Screen
1280 x 800
(2) 10/100/1000Base-T Ethernet interface (RJ-45 connector)
(6) USB Ports Total – (2) Front USB Ports
(1) USBTMC
Supports IEEE – 488.2
Standard 15-pin D-Type SVGA-compatible DB-15 connector, DVI connector and HDMI connector
Via Windows Automation, or via Teledyne LeCroy Remote Command Set
Intel B810 Celeron processor 1.6 GHz or better
2 GB Standard
Windows Embedded Standard 7 64-Bit
Solid State Drive 64 GB or greater
Power Requirements
Voltage
Power Consumption (Nominal)
Max Power Consumption
100-240 VAC + 10% at 45-440 Hz; Automatic AC Voltage Selection
200 W / 200 VA
Max Power Consumption 320 W / 320 VA (with all PC peripherals and active probes connected to 4 channels)
Environmental
Temperature
Humidity
Altitude
Operating: 5 °C to 40 °C; Non-Operating: -20 °C to 60 °C
Operating: 5% to 90% relative humidity (non-condensing) up to +31 °C, Upper limit derates to 50% relative humidity
(non-condensing) at +40 °C; Non-Operating: 5% to 95% relative humidity (non-condensing) as tested per
MIL-PRF-28800F
Operating: 3,048 m (10,000 ft) max at ≤ 30C; Non-Operating: Up to 12,192 meters (40,000 ft)
Physical
Dimensions (HWD)
Weight
Regulatory
CE Certification
UL and cUL Listing
11.48”H x 15.72”W x 5.17“D (291.7 mm x 399.4 mm x 131.31 mm)
5.86 kg (12.9 lbs)
Low Voltage Directive 2006/95/EC
EN 61010-1:2010, EN 61010-2-030:2010
EMC Directive 2004/108/EC
EN 61326-1:2006, EN61326-2-1:2006
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No.61010-1-12
15