HDO4000 Datasheet, PDF (12/16 Pages) Teledyne Technologies Incorporated – High Definition Oscilloscopes

Serial Trigger and Decode Options
Debugging serial data busses can
be confusing and time consuming.
The serial data trigger and decode
options for HDO4000 provide time
saving tools for serial bus debug and
validation.
The serial data trigger will quickly
isolate events on a bus eliminating
the need to set manual triggers and
hoping to catch the right information.
Trigger conditions can be entered
in binary or hexadecimal formats
and conditional trigger capabilities
even allow triggering on a range of
different events.
Protocol decoding is shown directly
on the waveform with an intuitive,
color-coded overlay and presented
in binary, hex or ASCII. Decoding
on the HDO4000 is fast even with
long memory and zooming in to the
waveform shows precise byte by byte
decoding.
To further simplify the debug process
all decoded data can be displayed in
a table below the waveform grid.
Selecting an entry in the table with
the touch screen will display just
that event. Additionally, built-in
search functionality will find specific
decoded values.
Supported Serial Data
Protocols
• I²C, SPI, UART
• CAN, LIN, FlexRay™, SENT
• USB 1.0/1.1/2.0, USB 2.0-HSIC
• Audio (I²S, LJ, RJ, TDM)
• MIL-STD-1553, ARINC 429
• MIPI D-PHY, DigRF 3G, DigRF v4
View decoded protocol information on top of physical layer waveforms and trigger on protocol specific messages.
12