HDO4000 Datasheet, PDF (14/16 Pages) Teledyne Technologies Incorporated – High Definition Oscilloscopes

specifications
Vertical
Bandwidth (@ 50Ω)
Rise time
Input Channels
Vertical Resolution
Sensitivity
DC Gain Accuracy
BW Limit
Maximum Input Voltage
Input Coupling
Input Impedance
Offset Range
Offset Accuracy
HDO4022
HDO4024
HDO4032
HDO4034
HDO4054
HDO4104
200 MHz
350 MHz
500 MHz
1.75 ns typical
1 ns typical
700 ps typical
2
4
2
4
4
12-bits; up to 15-bits with enhanced resolution (ERES)
50 Ω: 1mV/div - 1 V/div; 1 MΩ: 1 mV/div - 10 V/div
±(0.5%) Full Scale, offset at 0 V
20 MHz, 200 MHz
50 Ω: 5 Vrms; 1 MΩ: 400 V max (DC + Peak AC ≤ 10 kHz)
50 Ω: DC, GND; 1 MΩ: AC, DC, GND
50 Ω ±2.0%, 1 MΩ ±2.0% || 15 pF
50 Ω: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 1 V: ±10 V
1 MΩ: 1 mV - 4.95 mV: ±1.6 V, 5 mV - 9.9 mV: ±4 V, 10 mV - 19.8 mV: ±8 V, 20 mV - 100 mV: ±16 V,
 1  02 mV - 198 mV: ±80V, 200 mV - 1 V: ±160 V, 1.02 V -10 V: ±400 V
±(1.0% of offset value + 0.5%FS + 0.02% of max offset + 1 mV)
1 GHz
450 ps typical
4
Acquisition
Sample Rate (Single-shot)
Sample Rate (Repetitive)
Record Length
Acquisition Modes
Timebase Range
Timebase Accuracy
2.5 GS/s
125 GS/s
Standard -STD: 12.5 Mpts/ch (all channels) 25 Mpts (interleaved)
Optional -L:  25 Mpts/ch (all channels), 50 Mpts (interleaved)
Real Time, Roll, RIS (Random Interleaved Sampling),
Sequence (Segmented Memory up to 10,000 segments with 1μs intersegment time)
20 ps/div–10000 s/div; RIS available at ≤ 10 ns/div; Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
±2.5 ppm for 5 to 40C + 1.0 ppm/year from calibration
Trigger System
Modes
Sources
Coupling
Pre-trigger Delay
Post-trigger Delay
Hold-off
Internal Trigger Level Range
External Trigger Level Range
Trigger Types
Auto, Normal, Single, Stop
Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)
DC, AC, HFREJ, LFREJ
0-100% of full scale
0-10,000 Divisions
2ns up to 20s or 1 to 1,000,000,000 events
±4.1 Divisions
Ext: ±400mV, Ext/10: ±4V
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate,
Interval (signal or Pattern), Dropout, Qualified (State or Edge)
Measure, Zoom and Math Tools
Measurement Parameters
Up to 8 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low),
Delay, Delta Period @ Level, Delta Time @ Level, Duty, Duty @ Level, Edge @ Level, Fall Time (90%–10%),
Fall Time (80%–20%), Frequency, Frequency @ level, Maximum, Mean, Minimum, Overshoot+, Overshoot-,
Peak-Peak, Period, Period @ Level, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew,
Standard Deviation, Time @ Level, Top (High), Width+, Width-. Statistics and Histicons can be added to any
measurement and all measurements can be gated.
Zooming
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Math Functions
Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative,
Envelope, Enhanced Resolution (to 15-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof,
Square, Square Root, Trend, Zoom and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and
FlatTop windows). 2 dual operator math functions may be defined at a time.
14