408-2029 Datasheet, PDF (7/10 Pages) TE Connectivity Ltd – ROTA-CRIMP Hand Crimping Tools

Single Crimp
SOLISTRAND Terminals
and Splices
Terminal
3
1
5
Wire Size
Stamped Under ²
Tongue
1
Parallel
Splice
5
3
1
Wire Size
Stamped
on Splices
Butt Splice
5
2
4
3
1
Dual Crimp
SOLISTRAND Terminals
and Splices
408- 2029
3
1
5
Terminal
3
3
2
1
Wire Size
Stamped Under
Tongue
Parallel
Splice
5
2
Wire Size
Stamped
on Splice
1
2
4
Wire Size
Stamped
on Splice
Butt Splice
1
3
1 _{Crimp centered. Crimp may be off center BUT NOT}
OFF END OF WIRE BARREL.
2 _{Wire size stamped on terminal or splice matches}
CMA of wire being used.
3 _{Insulation does not enter wire barrel.}
4 _{Wire is visible through inspection hole of butt splice.}
5 _{On terminals and parallel splices, bare wire ends}
must be flush with or extend slightly beyond end of wire
barrel.
1 _{Crimps evenly spaced BUT NOT OVERLAPPED OR}
OFF END OF WIRE BARREL.
2 _{Wire size stamped on terminal or splice matches}
CMA of wire being used.
3 _{Insulation does not enter wire barrel.}
4 _{Wire is visible through inspection hole of butt splice.}
5 _{On terminals and parallel splices, bare wire ends}
must be flush with or extend slightly beyond end
of wire barrel.
Figure 7
Rev D
7 of 10