108-19376 Datasheet, PDF (7/13 Pages) TE Connectivity Ltd – This specification covers the performance, test and quality requirements for the Tyco Electronics High Speed 8 pairs IO board and cable connector.

Para Test Description
3.4.40 Rapid change of
Temperature
3.4.41 Climatic sequence
Dry heat
1^st Damp heat cycle
Cold
2^nd Damp heat cycle
3.4.42 Damp/heat steady
state
3.4.43 Temperature life.
3.4.44 Corrosion mixed
flowing gas
3.4.45 Resistance to
soldering heat board
connector
ENVIRONMENTAL
Performance
Requirements or Severity
-40°/90°C, 0,5 hrs / 0,5 hrs,
5 cycles
90°C, 16 hrs
25°/55°C, RH 93%, 24 hrs
-40°C, 2 hrs
25°/55°C, RH 93%, 24 hrs
Temperature 40°C, RH 93%,
Duration: 21 days
Subject mated specimens to 105°C for 240 hours
without electrical load.
Temperature 25°C, RH 75%,
Cl₂ 10 ppb, NO₂ 200 ppb, H2S 10 ppb,
SO₂ 200 ppb.
Duration: 20 days (un-mated)
Specimens were subject to the following reflow
profile. Fig 6
108-19376
Procedures
In acc. with
IEC 60512-11-4
In acc. with
IEC 60512-11-1
In acc. with
IEC 60512-11-3
In acc. with
IEC 60512-11-9
In acc. with
IEC 60512-11-7
Tyco 109-201,
method C
Rev. D
R6-77 (Rev. 03-00)
Page 7 of 13