408-10050 Datasheet, PDF (3/8 Pages) TE Connectivity Ltd – Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY

408-10050
Nominal Wire Size
mm² AWG
mm²
(Circular Mil Area)
Strip Lengths
mm [inch]
Ring Tongue Terminals Butt Splices
Min.
Max.
Min. Max.
7-8
8
6.637-10.539
[13,100-20,800]
8.334
[.328]
9.128
[.359]
10.319 11.112
[.406] [.437]
13-15
6
10.539-16.771
[20,800-33,100]
9.922
[.391]
13.225 11.906 12.700
[.522] [.469] [.500]
21
4⁽¹⁾
16.771-26.653
[33,100-52,600]
11.509
[.453]
12.302 13.493
[.484] [.531]
(1) STRATO-THERM 4 AWG can only be crimped with 2217330-[ ] Revision G or higher
14.288
[.563]
Figure 2
Parallel Splices
Min. Max.
10.319 11.112
[.406] [.437]
11.112 11.905
[.437] [.469]
13.493 14.288
[.531] [.563]
4. WIRE STRIPPING AND CRIMPING PROCEDURE
4.1. Wire Stripping
Strip the wire to the dimensions listed in Figure 2.
CAUTION
DO NOT nick or cut the wire strands.
DANGER
AVOID PERSONAL INJURY. When operating the tool, exercise caution while holding the terminals,
splices or wire near the crimping area.
4.2. Crimping Procedure
1. Ensure the wire range or size stamped on the terminal or splice corresponds with the size being used
with the wire size or range stamped on the nest and indenter.
2. Pivot the latch arm away from the yoke to open the head.
Rev D
3 of 8