108-115008 Datasheet, PDF (1/8 Pages) TE Connectivity Ltd – Shield Finger Scalable Height From 1.24mm to 3.4mm

Product Specification
108-115008
Shield Finger Scalable Height From 1.24mm to 3.4mm
1. SCOPE
1.1. Content
This specification covers the requirements for product performance test methods and quality
assurance provisions of the scalable spring finger. Applicable product descriptions and part
numbers are as shown in Appendix 1.
1.2. Qualification
When tests are performed on the subject product line, procedures specified in Figure 2 shall
be used. All inspections shall be performed using the applicable inspection plan and product
drawing.
2. APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between
the requirements of this specification and the product drawing, the product drawing shall take
precedence. In the event of conflict between the requirements of this specification and the
referenced documents, this specification shall take precedence.
2.1. Tyco Electronics Documents
501-115009-*: Qualification Test Report
2.2. Commercial Standard and Specifications:
Test Methods for Electronic Component Parts: MIL-STD-202.
DIST A2
LTR
Revised
REVISION RECORD
ASHL-0004-ES REV A
DR
Tony Zhang 15NOV10
CHK _{Wenke He 15NOV10}
APP _{Steven Yao 15NOV10}
NO
108-115008
REV LOC
A2 ES
T.Z ^16AUG11
DR DATE
PAGE
1 of 7
TITLE
Shield Finger 1.24mm to 3.4mm