C4532X7T2W474K230KE Datasheet, PDF (59/64 Pages) TDK Electronics – TDK MLCC PRODUCT LINE

58 _{Component Characteristic Analysis Tool}
SEAT stands for SElection Assistant of TDK components. SEAT makes it
easy to simulate the characteristics of components including inductors,
capacitors, common mode filters, and varistors. This not only reduces design
and development time, but also provides substantial support when searching
for optimal components for EMC and power supply use.
With SEAT, various kinds of impedance and S-parameters can be
displayed. Impedance characteristics such as magnitude value, phase,
admittance, inductance, capacitance, tanδ, and Q can be displayed. S-
parameters such as magnitude value, phase, group delay time, Smith chart,
and VSWR can be displayed. Mixed mode S-parameters, which are essential
for analyzing balanced components, can also be handled. In addition, it is
possible to display the temperature-resistance characteristics of NTC
thermistors, and the voltage-current characteristics of chip varistors.
Capabilities

Pulse Response Simulation (Single Lines and Differential Lines)
- This simulation can show the influence on waveforms when a component is
used on a digital circuit.

TDR Simulation
- This simulation shows the characteristic impedance of components.

NTC Thermistor Simulation
- This simulation can show the output voltage when a NTC thermistor is
installed on a circuit.

Inductor's Characteristic Simulation
- This simulation shows the DC bias characteristics, temperature
characteristics, and temperature rise characteristics caused by current flow.

Capacitor's Characteristic Simulation
- This simulation shows the DC bias characteristics, temperature
characteristics, and temperature rise characteristics caused by current flow.
©TDK Corporation of America – Contents are subject to change without notice.
Features

Over 4,000 Components are Included in the database including coils, capacitors,
inductors, beads, three-terminal filters, common mode filters, varistors, NTC
thermistors, baluns, etc…

Display frequency characteristics including impedance and S Parameters
(including mix mode)

Display DC bias and temperature characteristics

Pulse Response Simulation (Single end/differential transmission)

TDR Simulation (Assessment of component characteristic impedance)

Temperature increase simulation (Temperature increase from inductor direct
current and capacitor ripple)

User-Defined Filter

Characteristic Impedance Calculator (Characteristic impedance can be calculated
from circuit board dimensions (also compatible with coupled lines)

Product search function

Support automatic online updates (Only modified portions are downloaded from the
Internet to update the software to the latest version
 For more information, please visit http://www.tdk.co.jp/ccv/index.asp