C4532X7T2W474K230KE Datasheet, PDF (53/64 Pages) TDK Electronics – TDK MLCC PRODUCT LINE

52 _{TDK Technical Center}
The TDK Technical Center, located at the TDK Georgia factory, launched in 1Q of
2012 with analysis and technical capabilities to support TDK’s Multi-Layer Ceramic
Capacitor products. The TTC is capable of performing electrical / mechanical evaluation
and reliability testing in compliance to AEC-Q200 and MIL STD requirements. Future
activities from the TTC will offer enhanced marketing tools such as teardown analysis and
product demonstration as well as support request for new product development base on
market demand.
Capabilities
 Advanced Set Analysis
TDK’s Technical Center has the unique ability to analyze circuits, BOM’s, and applications to recommend, test, and replace electrolytic and tantalum
capacitors with MLCC capacitors via circuit identification, simulation, and verification.
 Custom Testing
Our Technical Center test engineers are able to conduct and expedite a variety of electrical and mechanical tests according to your custom test standards.
• Customer Specific Testing Standards (electrical, mechanical, etc.)
• Component Characterization
• Electrical parameter characterization
 Reliability Engineering
TDK Technical Center is also heavily involved with TDK reliability engineering. We conduct a variety of testing according to strict industry, MIL-STD, and AEC-
Q200 standards, some of these include: operating life test, biased humidity, destructive physical analysis, HALT testing, HAST testing, temperature cycle,
burn-in, enhanced inspection, etc.
• Life Testing
Film/TA Capacitor Replacement Analysis
• New Product Development Initiation
 Dedicated Customer Support
TDK Technical Center exhibits exceptional customer support via dedicated failure analysis services.
• Advanced Failure Analysis for High Reliability
• AEC-Q200 Approval Testing and Report
New Product Demonstration
AEC Q200 PPAP Qualification Report
Teardown Analysis & BOM optimization
Advanced Field Failure Analysis
©TDK Corporation of America – Contents are subject to change without notice.
Design Tools Characteristic Measurements