|
C4532X7T2W474K230KE Datasheet, PDF (3/64 Pages) TDK Electronics – TDK MLCC PRODUCT LINE | |||
|
◁ |
2
TDK MLCC PRODUCT LINE
C
CER
CEU
CGA
CGJ
CKC
CKD
CKG
CLL
General Application
Mid Voltage
High Voltage
High Temperature
High Q
Flip Type
Open Mode
Soft Termination
Conductive Epoxy
Controlled ESR
Serial Design
Automotive
Application
Extended Life
2-in-1 Array
4-in-1 Array
Feed Through
Mega Cap
Ultra Low
Inductance
⢠Wide range of case size and superior dimension precision
⢠Available in EIA class 1 and 2 dielectrics up to 50V
⢠Unique design allows for higher voltage in smaller case size
⢠Available in 100V, 250V, 450V, and 630V
⢠Advance design provides improved withstanding voltage
⢠Available rating up to 3000V
⢠Stable temperature characteristics up to 150ºC
⢠Highly precise temperature performance (±7.5%) up to 125º C
⢠Design with higher Q factor than standard capacitors
⢠Excellent attenuation and high self resonance frequency (SRF)
⢠Flipped geometry provides lower inductance than standard capacitor
⢠Special design allows for adequate high frequency current to IC
⢠Unique design allows for increase resistance to mechanical bending
⢠Improved performance in vibration and electrical stresses
⢠Improved bending resistance and temperature cycle performance
⢠Termination technology available for most case sizes including arrays
⢠AgPdCu termination for conductive glue mounting
⢠Improved mechanical/thermal strength when used with conductive glue
⢠Unique design allows for specified âcontrolledâ ESR
⢠Same no-hassle mounting method as standard 2-terminal components
⢠ESR is controlled without affecting the ESL
⢠2 series-connected capacitors in one body
⢠Improved bending resistance and temperature cycle performance
⢠Ultra high reliability design for automotive battery line applications
⢠Qualified to CDF AEC Q-200 automotive testing standard
⢠Manufactured using matured process for guaranteed performance
⢠Available in C0G, X7R and X8R temperature characteristics
⢠Extensive testing to ensure higher reliability and longer life
⢠Reliability tests based on MIL-STD requirements
⢠Guaranteed TC Bias and Hot IR performance
⢠Allows for reduction of PCB space and mounting time
⢠Unique electrode design reduces crosstalk
⢠Also available in soft termination for higher reliability performance
⢠Optimized for noise bypass with signal and power source circuits
⢠Can be used for meeting EMC requirements
⢠Ideal for use at higher frequencies due to low parasitic inductance
⢠Advance design for twice the capacitance on single footprint
⢠Improved vibration and thermal/mechanical stress performance
⢠Lower ESR and ESL than ALU and TA capacitor
⢠Unique internal structure allows cancelation of magnetic fields to reduce
equivalent series inductance
⢠Eight sided terminal electrode design in one capacitor
©TDK Corporation of America â Contents are subject to change without notice.
⢠01005 ~ 2220 / C0G, SL, X5R, X6S, X7R, X7S, Y5V
⢠4V ~ 50V / up to 100 µF
⢠0402 ~ 2220 / C0G, X6S, X7R, X7S, X7T
⢠100V ~ 630V / up to 15 µF
⢠1808 ~ 1812 / C0G, X7R, X7S
⢠1000V ~ 3000V / up to 10 nF
⢠0402 ~ 1210 / X8R
⢠16V ~ 100V / up to 10 µF
⢠0201 / C0G
⢠25V / up to 20 pF
⢠0204 ~ 0612 / X5R, X6S, X7R, X7S
⢠4V ~ 50V / up to 10 µF
⢠0805 ~ 2220 / X7R, X8R
⢠16V ~ 630V / up to 22 µF
⢠0805 ~ 3025 / X7R, X7S, X7T
⢠16V ~ 630V / up to 100 µF
⢠0402 ~ 1210 / C0G, X7R, X8R
⢠25V ~ 100V / up to 10 µF
⢠0603 ~ 0805 / X5R
⢠4V ~ 10V / up to 10 µF
⢠0603 ~ 0805 / X7R
⢠50V / up to 100 nF
⢠0402 ~ 2220 / C0G, X5R, X7R, X7S, X7T, X8R
⢠6.3V ~ 630V / up to 47 µF
⢠0402 ~ 1206 / C0G, X7R
⢠6.3V ~ 50V / up to 10 µF
⢠CKCN27 ~ CKCA43 / C0G, X5R, X7R
⢠6.3V ~ 50V / up to 2.2 µF
⢠0402 ~ 1206 / up to 125ºC temperature range
⢠6.3V ~ 50V / up to 22 µF
⢠CKGxxK ~ CKGxxN / X5R, X7R, X7S, X7T
⢠16V ~ 630V / up to 100 µF
⢠0603 ~ 0805 / X7R, X7S
⢠4V ~ 10V / up to 4.7 µF
|
▷ |