C0402C0G1C220KT Datasheet, PDF (5/34 Pages) TDK Electronics – MULTILAYER CERAMIC CHIP CAPACITORS

8. PERFORMANCE
No.
Item
1 External Appearance
table 1
Performance
No defects which may affect
performance.
2 Insulation Resistance 10,000MΩ or 500MΩ·μF min.
(As for the capacitors of rated
voltage 16, 10V DC and lower,
10,000 MΩ or 100MΩ·μF min.,)
whichever smaller.
3 Voltage Proof
Withstand test voltage without
insulation breakdown or other
damage.
4 Capacitance
Within the specified tolerance.
5Q
(Class1)
6 Dissipation Factor
(Class2)
Rated Capacitance
Q
30pF and over
1,000 min.
Under 30pF 400+20×C min.
C : Rated capacitance (pF)
T.C.
D.F.
JB
0.025 max.
X5R
0.03 max.
X6S
0.05 max.
X7R
0.075 max.
X7S
0.10 max.
X7T
0.15 max.
Test or inspection method
Inspect with magnifying glass (3×), in case
of C0402 and C0603 type, with magnifying
glass (10×)
Apply rated voltage for 60s.
Class Rated voltage Apply voltage
Class1
100V and under
Over 100V
500V and under
Over 500V
3 × rated voltage
1.5 × rated voltage
1.3 × rated voltage
100V and under 2.5 × rated voltage
Over 100V
Class2
1.5 × rated voltage
500V and under
Over 500V 1.3 × rated voltage
Above DC voltage shall be applied for
1s.
Charge / discharge current shall not
exceed 50mA.
Class
Class1
Rated
Capacitance
1000pF and
under
Over 1000pF
Measuring
frequency
1MHz±10%
1kHz±10%
Measuring
voltage
0.5 - 5 Vrms.
10uF and
Class2
under
0.5±0.2Vrms.
1kHz±10%
1.0±0.2Vrms.
Over 10uF 120Hz±20% 0.5±0.2Vrms.
For information which product has which
measuring voltage, please contact with our
sales representative.
See No.4 in this table for measuring
condition.
See No.4 in this table for measuring
condition.
For information which product has which
Dissipation Factor, please contact with our
sales representative.
—4—