STM32F410X8 Datasheet, PDF (72/142 Pages) STMicroelectronics – Clock, reset and supply management

Electrical characteristics
STM32F410x8/B
Figure 16. Typical V_BAT current consumption (LSE and RTC ON/LSE oscillator
in “low power” mode selection
























7HPSHUDWXUHƒ&
069
Figure 17. Typical V_BAT current consumption (LSE and RTC ON/LSE oscillator
in “high-drive” mode selection)
























7HPSHUDWXUHƒ&
069
I/O system current consumption
The current consumption of the I/O system has two components: static and
dynamic.
I/O static current consumption
All the I/Os used as inputs with pull-up generate current consumption when the pin is
externally held low. The value of this current consumption can be simply computed by using
the pull-up/pull-down resistors values given in Table 55: I/O static characteristics.
For the output pins, any external pull-down or external load must also be considered to
estimate the current consumption.
Additional I/O current consumption is due to I/Os configured as inputs if an intermediate
voltage level is externally applied. This current consumption is caused by the input Schmitt
72/142
DocID028094 Rev 5