English
Language : 

STM32F410X8 Datasheet, PDF (50/142 Pages) STMicroelectronics – Clock, reset and supply management
Electrical characteristics
STM32F410x8/B
6.1.6
Power supply scheme
Figure 13. Power supply scheme
sdс
ϭ ͘ϲϱƚŽϯ͘ϲs
sd
WŽǁĞƌ
ƐǁŝƚĐŚ
ĂĐŬƵƉĐŝƌĐƵŝƚƌLJ
; K^ϯϮ<͕Zd͕
tĂŬĞƵƉůŽŐŝĐ
ĂĐŬƵƉƌĞŐŝƐƚĞƌƐͿ ͕
'W/KƐ
ϭdžϰ͘ϳђ&
s 
ϰп ϭ ϬϬŶ&
нϭпϰ͘ϳђ&
sWͺϭ
s
ϭ ͬϮ ͬ͘͘͘ ϰ
s^^
ϭ ͬϮ ͬ͘͘͘ ϰ
WZͺKE
s
s
sZ&
ϭϬϬŶ&
нϭђ&
ϭϬϬŶ&
нϭђ&
s^^
Khd
/K
/E
>ŽŐŝĐ
sŽůƚĂŐĞ
ƌĞŐƵůĂƚŽƌ
ZĞƐĞƚ
ĐŽŶƚƌŽůůĞƌ
<ĞƌŶĞůůŽŐŝĐ
; Wh͕ĚŝŐŝƚĂů
ΘZDͿ
&ůĂƐŚŵĞŵŽƌLJ
ŶĂůŽŐ͗

ZƐ ͕
W>> ͕͘͘
Caution:
06Y9
1. To connect PDR_ON pin, refer to Section 3.15: Power supply supervisor.
Each power supply pair (for example VDD/VSS, VDDA/VSSA) must be decoupled with filtering
ceramic capacitors as shown above. These capacitors must be placed as close as possible
to, or below, the appropriate pins on the underside of the PCB to ensure good operation of
the device. It is not recommended to remove filtering capacitors to reduce PCB size or cost.
This might cause incorrect operation of the device.
50/142
DocID028094 Rev 5