LSM303DLHTR Datasheet, PDF (35/47 Pages) STMicroelectronics – Sensor module: 3-axis accelerometer and 3-axis magnetometer

LSM303DLH
9.1.12 INT1_CFG_A (30h)
Table 38. INT1_CFG_A register
AOI
6D
ZHIE
ZLIE
YHIE
Registers description
YLIE
XHIE
XLIE
Table 39. INT1_CFG_A description
AND/OR combination of interrupt events. Default value: 0.
AOI
(See Table 40)
6D
t(s) ^ZHIE
roduc ^ZLIE
lete ^{P YHIE}
bso _YLIE
t(s) ^{- O XHIE}
roduc ^XLIE
6 direction detection function enable. Default value: 0.
(See Table 40)
Enable interrupt generation on Z high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Z low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on Y high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on Y low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
Enable interrupt generation on X high event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value higher than preset threshold)
Enable interrupt generation on X low event. Default value: 0
(0: disable interrupt request;
1: enable interrupt request on measured accel. value lower than preset threshold)
lete ^{P Configuration register for Interrupt 1 source.}
so _{Table 40. Interrupt 1 source configurations}
Ob AOI
6D
Interrupt mode
0
0
OR combination of interrupt events
0
1
6 direction movement recognition
1
0
AND combination of interrupt events
1
1
6 direction position recognition
Doc ID 16941 Rev 1
35/47