STDS75 Datasheet, PDF (28/37 Pages) STMicroelectronics – Digital temperature sensor and thermal watchdog

Maximum rating
5
Maximum rating
STDS75
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 11. Absolute maximum ratings
Symbol
Parameter
Value
Unit
T_STG
T_SLD(1)
Storage temperature (V_CC off, V_BAT off)
Lead solder temperature for 10 seconds
–60 to 150
°C
260
°C
V_IO
Input or output voltage
V_CC +0.5
V
V_DD
Supply voltage
7.0
V
V_OUT
Output voltage
V_DD + 0.5
V
I_O
Output current
10
mA
P_D
Power dissipation
320
mW
1. Reflow at peak temperature of 255°C to 260°C for < 30 seconds (total thermal budget not to exceed 180°C
for between 90 to 150 seconds).
28/37