LPS001WP Datasheet, PDF (23/30 Pages) STMicroelectronics – MEMS pressure sensor 300-1100 mbar absolute digital output barometer

LPS001WP
Register description
Table 22.
POUT7 -
POUT0
RESS_OUT_L (28h) register description
Pressure data LSB (when BLE bit in the CTRL_REG1 is set to ‘0’, little endian)
Pressure data are expressed as absolute values. Values exceeding the operating pressure
range (see Table 3) are clipped.
In big endian mode (BLE bit in CTRL_REG1 set to ‘1’) the content of this register is the MSB
pressure data.
8.6
PRESS_OUT_H (29h)
t(s) ^{Table 23. PRESS_OUT_H (29h) register}
c _{POUT15 POUT14 POUT13 POUT12 POUT11 POUT10}
POUT9
POUT8
rodu _{Table 24.}
P _{POUT15 -}
te ^POUT8
PRESS_OUT_H (29h) register description
Pressure data MSB (when BLE bit in CTRL_REG1 is set to ‘0’)
ole _{In big endian mode (BLE bit in CTRL_REG1 set to ‘1’) the content of this register is the LSB}
bs ^{pressure data.}
Obsolete ^{Product(s) - O 8.7}
TEMP_OUT_L (2Ah)
Table 25. TEMP_OUT_L (2Ah) register
TOUT7 TOUT6 TOUT5 TOUT4
TOUT3
TOUT2
TOUT1
TOUT0
Table 26.
TOUT7 -
TOUT0
TEMP_OUT_L (2Ah) register description
Temperature data LSB (when BLE bit in CTRL_REG1 register is set to ‘0’, little
endian)
Temperature data are expressed as 2s complement numbers.
In big endian mode (BLE bit in CTRL_REG1 set to ‘1’) the content of this register is the MSB
temperature data.
8.8
TEMP_OUT_H (2Bh)
Table 27. TEMP_OUT_H (2Bh) register
TOUT15 TOUT14 TOUT13 TOUT12
TOUT11
TOUT10
TOUT9
TOUT8
Doc ID 18171 Rev 1
23/30