|
SPC56EL60L5 Datasheet, PDF (153/160 Pages) STMicroelectronics – 32-bit Power Architecture® microcontroller for automotive SIL3/ASILD chassis and safety applications | |||
|
◁ |
SPC56XL60/54
Revision history
Table 44. Document revision history (continued)
Date
Revision
Changes
23-Mar-2011
6
(continued)
Added symbol âCCâ to the description in the âIntroductionâ section.
Updated âInput leakage currentâ specs in the âDC electrical characteristicsâ
table.
Changed TADC_S to Tsample and TADC_C toTconv in the âADC conversion
characteristicsâ table and footnotes.
Removed âIINJâ from the âADC conversion characteristicsâ table as this is
included in IS1WIKNJ and IS1WWiNJ.
Changed RESET_B to RESET in the "Reset sequence" section.
Added the âFlash memory timingâ table.
Added cut2 specs for TDRB and TERLB to the âReset sequencesâ table.
Added âWKUP/NMI Timingâ subsection and âWKUP/NMI Glitch Filterâ table to
the âAC timing characteristicsâ section.
Added âNexus DDR Mode output timingâ table to the âNexus timingâ section.
Removed the âCLKOUTâ diagram from the âExternal interrupt timing (IRQ pin)â
section as it is not relevant.
Corrected an error in the IRQ timing in the âExternal interrupt timingâ figure.
Updated the tSDC parameters in the âDSPI timingâ table.
Renamed the âElectromagnetic Interference (EMI) characteristicsâ section (is
âElectromagnetic Interference (EMI) characteristics (cut1)â) and revised all
information in that section.
In the âVoltage regulator electrical characteristicsâ section, added the BCX68
from Infineon to the list of supported transistors.
Revised the âVoltage regulator electrical specificationsâ table to include cut1
and cut2 information.
Renamed the âSupply current characteristicsâ section (is âSupply current
characteristics (cut2)â) and revised it to show meaningful data.
In the footnotes of the âMain oscillator electrical characteristicsâ table, changed
SELMARGIN to XOSC_MARGIN.
In the âADC conversion characteristicsâ table:
â Changed âLSBâ to âCountsâ.
â Created separate rows for the TUE specifications.
Removed the BGA row from the âTemperatureâ table entry.
Added bullet regarding HALT and STOP in the âClock, reset, power, mode and
test control modules (MC_CGM, MC_RGM, MC_PCU, and MC_ME)â
subsection of the âFeaturesâ section.
In the âAnalog-to-Digital Converter moduleâ subsection of the âFeature Detailsâ
section, changed âMotor control modeâ to âCTU modeâ to be consistent with
the nomenclature used in the Reference Manual.
Updated the JCOMP entries in the âPin function summaryâ table.
Added footnotes regarding pad pull devices to NMI, TMS, TCK, and JCOMP in
the âSystem pinsâ table.
Added âTime constant of RC filter at LVD inputâ parameters to the âMain supply
LVD (LVD Main) specificationsâ table.
Doc ID 15457 Rev 8
153/160
|
▷ |