English
Language : 

STM32F469XX Datasheet, PDF (138/217 Pages) STMicroelectronics – ARMCortex-M4 32b MCU+FPU, 225DMIPS, up to 2MB Flash/384+4KB RAM, USB OTG HS/FS, Ethernet, FMC, dual Quad-SPI, Graphical accelerator, Camera IF, LCD-TFT & MIPI DSI
◁
Electrical characteristics
STM32F469xx
Table 60. I/O AC characteristics(1)(2) (continued)
OSPEEDRy
[1:0] bit
value(1)
Symbol
Parameter
Conditions
Min Typ Max Unit
CL = 30 pF, VDD ≥ 2.7 V
-
- 100(4)
CL = 30 pF, VDD ≥ 1.8 V
-
-
50
fmax(IO)out Maximum frequency(3)
CL = 30 pF, VDD ≥ 1.7 V
-
CL = 10 pF, VDD≥ 2.7 V
-
- 42.5
-
180(4) MHz
CL = 10 pF, VDD ≥ 1.8 V
-
-
100
11
CL = 10 pF, VDD ≥ 1.7 V
-
- 72.5
CL = 30 pF, VDD ≥ 2.7 V
-
-
4
CL = 30 pF, VDD ≥1.8 V
-
-
6
tf(IO)out/
tr(IO)out
Output high to low level fall
time and output low to high
level rise time
CL = 30 pF, VDD ≥1.7 V
CL = 10 pF, VDD ≥ 2.7 V
-
-
-
7
ns
-
2.5
CL = 10 pF, VDD ≥1.8 V
-
-
3.5
CL = 10 pF, VDD ≥1.7 V
-
-
4
Pulse width of external signals
-
tEXTIpw detected by the EXTI
-
controller
10
-
-
ns
1. Guaranteed by design.
2. The I/O speed is configured using the OSPEEDRy[1:0] bits. Refer to the STM32F4xx reference manual for a description of
the GPIOx_SPEEDR GPIO port output speed register.
3. The maximum frequency is defined in Figure 40.
4. For maximum frequencies above 50 MHz and VDD > 2.4 V, the compensation cell should be used.
Figure 40. I/O AC characteristics definition






(;7(51$/
287387
21&/
WU ,2 RXW
WI ,2 RXW
7
0D[LPXPIUHTXHQF\LVDFKLHYHGLI WUWI ”  7DQGLIWKHGXW\F\FOHLV  
ZKHQORDGHGE\&/VSHFLILHGLQWKHWDEOH³,2$&FKDUDFWHULVWLFV´

DLG
138/217
DocID028196 Rev 3
 ▷