CLT01-38SQ7 Datasheet, PDF (1/18 Pages) STMicroelectronics – High speed digital input current limiter

CLT01-38SQ7
High speed digital input current limiter






%277209,(:


           
























           
7239,(:
4)1[/
Features
• 8 inputs - 8-bit SPI output
• High side input with common ground
• 5 V Voltage regulator
• Package: QFN 7x7 - 48L
• 30 V reverse polarity capable
• Adjustable current limiters
• LED output for visual status
• Optional: 16-bit mode with parity check,
temperature and voltage alarms
• Daisy chain capable
• Power dissipation: 78 mW per channel
Complies with following standards:
• IEC61000-4-2:
– ±8 kV contact discharge
– ±15 kV air discharge
• IEC61000-4-4:
– ±4 kV
Datasheet - production data
• IEC61000-4-5:
– Input: ±1 kV
– Power supply: ±2.5 kV
Application
• Programmable logic controller and remote
input modules
• High speed protected termination for digital
input with serialized SPI output
• IEC61131-2 type 1, 2 and 3
• Compliant with EN60947-5-2
Benefits
• Simplified design due to
– Built-in over voltage robustness and
immune data transfer
– Compliance with sensors and PLC's
standards
• Space saving in cost effective solution with
– Integrated QFN 7x7 package
– SPI output reducing opto-couplers quantity
• Energy efficient solution
– Energy-less input LED visual status
powered by inputs current
– Low overall dissipation versus discrete
Description
The CLT01-38SQ7 provides an 8-line protected
digital input termination with serialized state
transfer. This device enhances the I/O module
density by cutting the dissipation (78 mW per
input) and reducing the count of opto-transistors.
Its 6.25 MHz SPI peripheral output serializes the
input state transfer to the I/O module controller.
July 2015
This is information on a product in full production.
DocID028182 Rev 1
1/18
www.st.com