LAN8710 Datasheet, PDF (42/79 Pages) SMSC Corporation – MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR Technology in a Small Footprint

MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR^® Technology in a Small Footprint
Datasheet
Table 5.25 Register 4 - Auto Negotiation Advertisement (continued)
ADDRESS
4.9
4.8
NAME
100Base-T4
100Base-TX Full
Duplex
DESCRIPTION
1 = T4 able,
0 = no T4 ability
This Phy does not support 100Base-T4.
1 = TX with full duplex,
0 = no TX full duplex ability
4.7
100Base-TX
1 = TX able,
0 = no TX ability
4.6
10Base-T Full 1 = 10Mbps with full duplex
Duplex
0 = no 10Mbps with full duplex ability
4.5
10Base-T
1 = 10Mbps able,
0 = no 10Mbps ability
4.4:0
Selector Field [00001] = IEEE 802.3
MODE
RO
DEFAULT
0
RW
Set by
MODE[2:0]
bus
RW
1
RW
Set by
MODE[2:0]
bus
RW
Set by
MODE[2:0]
bus
RW
00001
Table 5.26 Register 5 - Auto Negotiation Link Partner Ability
ADDRESS
NAME
DESCRIPTION
MODE DEFAULT
5.15
5.14
5.13
5.12:11
5.10
5.9
5.8
5.7
5.6
5.5
5.4:0
Next Page
1 = “Next Page” capable,
RO
0 = no “Next Page” ability
This Phy does not support next page ability.
Acknowledge 1 = link code word received from partner
RO
0 = link code word not yet received
Remote Fault 1 = remote fault detected,
RO
0 = no remote fault
Reserved
RO
Pause Operation 1 = Pause Operation is supported by remote MAC,
RO
0 = Pause Operation is not supported by remote MAC
100Base-T4
1 = T4 able,
RO
0 = no T4 ability.
This Phy does not support T4 ability.
100Base-TX Full 1 = TX with full duplex,
RO
Duplex
0 = no TX full duplex ability
100Base-TX
1 = TX able,
RO
0 = no TX ability
10Base-T Full 1 = 10Mbps with full duplex
RO
Duplex
0 = no 10Mbps with full duplex ability
10Base-T
1 = 10Mbps able,
RO
0 = no 10Mbps ability
Selector Field [00001] = IEEE 802.3
RO
0
0
0
0
0
0
0
0
0
0
00001
Revision 1.0 (04-15-09)
42
DATASHEET
SMSC LAN8710/LAN8710i