SKY66109_11 Datasheet, PDF (6/14 Pages) Skyworks Solutions Inc. – Integrated PA with up to plus 22.5 dBm output power

DATA SHEET • SKY66109-11: ZIGBEE/SMART ENERGY FEM
Table 6. SKY66109-11 Mode Control Logic (Note 1)
(VCC1 = VCC2 = 3.0 V, TA = +25 C)
Mode
Description
CPS
(Pin 18)
CSD
(Pin 17)
CTX
(Pin 20)
0
All off (sleep mode) (Note 2)
X
0
X
1
Receive bypass mode
0
1
0
2
Receive LNA mode
1
1
0
4
Transmit mode
X
1
1
Note 1: “0” = 0 V. “1” = +3.0 V. “X” = don’t care (must be either 0 V or Vcc voltage). Any state other than described in this table places the switch into an
undefined state. An undefined state will not damage the device.
Note 2: Remove EVB pulldown resistors to achieve specified sleep current with CTX or CPS high.
Typical Current
Consumption
0.1 μA
250 μA
5 mA
30 mA
Table 7. SKY66109-11 Antenna Enable Logic
(VCC1 = VCC2 = 3.0 V, TA = +25 C)
Description
CPS
(Pin 18)
CSD
(Pin 17)
CTX
(Pin 20)
ANT_SEL
(Pin 14)
ANT1 port enabled
X
X
X
0
ANT2 port enabled
X
X
X
1
Note: “0” = 0 V. “1” = +3.0 V. “X” = don’t care. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
6
August 13, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203034F