C8051T620-DK Datasheet, PDF (6/30 Pages) Silicon Laboratories – C8051T620/2 DEVELOPMENT KIT USER’S GUIDE

C8051T620/2-DK
5.3. Configuration Wizard 2
Configuration Wizard 2 is a code generation tool for all Silicon Laboratories devices. Code is generated through the
use of dialog boxes for each device peripheral as shown in Figure 2.
Figure 2. Configuration Wizard 2 Utility
The Configuration Wizard utility helps accelerate development by automatically generating initialization source
code to configure and enable the on-chip resources needed by most design projects. In just a few steps, the wizard
creates complete startup code for a specific Silicon Laboratories MCU. The program is configurable to provide the
output in C or assembly language.
For more information, refer to the Configuration Wizard 2 help available under the Help menu in Configuration
Wizard 2 or refer to the Configuration Wizard 2 documentation. Documentation and software are available from the
downloads webpage: www.silabs.com/mcudownloads.
5.4. Keil uVision2, uVision3, and uVision4 Silicon Laboratories Drivers
As an alternative to the Silicon Laboratories IDE, the µVision debug driver allows the Keil µVision2, µVision3, and
µVision4 IDEs to communicate with Silicon Laboratories’ on-chip debug logic. In-system Flash memory
programming integrated into the driver allows for rapid updating of target code. The µVision2, µVision3, and
µVision4 IDEs can be used to start and stop program execution, set breakpoints, check variables, inspect and
modify memory contents, and single-step through programs running on the actual target hardware.
For more information, refer to the µVision driver documentation. The documentation and software are available
from the downloads webpage: www.silabs.com/mcudownloads.
6
Rev. 0.5