EFM32TG210 Datasheet, PDF (48/66 Pages) Silicon Laboratories – Output state retention and wake-up from Shutoff Mode

...the world's most energy friendly microcontrollers
Alternate
Functionality 0
OPAMP_OUT0ALT
DAC0_OUT1ALT /
OPAMP_OUT1ALT
OPAMP_OUT2 PD5
DAC0_P1 /
OPAMP_P1
PD6
OPAMP_P2
PD4
DBG_SWCLK
PF0
DBG_SWDIO
PF1
DBG_SWO
PF2
GPIO_EM4WU0
GPIO_EM4WU3
GPIO_EM4WU4
GPIO_EM4WU5
PA0
PF1
PF2
PE13
HFXTAL_N
PB14
HFXTAL_P
I2C0_SCL
I2C0_SDA
LES_ALTEX0
LES_ALTEX1
LES_ALTEX5
LES_ALTEX6
LES_ALTEX7
LES_CH0
LES_CH1
LES_CH13
LES_CH14
LES_CH15
LETIM0_OUT0
LETIM0_OUT1
LEU0_RX
PB13
PA1
PA0
PD6
PD7
PE11
PE12
PE13
PC0
PC1
PC13
PC14
PC15
PD6
PD7
PD5
LEU0_TX
PD4
LFXTAL_N
LFXTAL_P
PCNT0_S0IN
PCNT0_S1IN
PRS_CH0
PB8
PB7
PC13
PC14
PA0
1
PC13
PF0
PF1
PC15
PD7
PD6
PB11
PB14
PB13
LOCATION
2
3
4
PC14 PC15
PC1
PC0
PF0
PF1
PF1
PA0
PF0
PF2
PC0 PD6
PC1 PD7
5
6
PF1 PE13
PF0 PE12
Description
OPAMP alternative output for channel 0.
Digital to Analog Converter DAC0_OUT1ALT /
OPAMP alternative output for channel 1.
Operational Amplifier 2 output.
Operational Amplifier 1 external positive input.
Operational Amplifier 2 external positive input.
Debug-interface Serial Wire clock input.
Note that this function is enabled to pin out of reset, and has
a built-in pull down.
Debug-interface Serial Wire data input / output.
Note that this function is enabled to pin out of reset, and has
a built-in pull up.
Debug-interface Serial Wire viewer Output.
Note that this function is not enabled after reset, and must be
enabled by software to be used.
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
Pin can be used to wake the system up from EM4
High Frequency Crystal negative pin. Also used as external
optional clock input pin.
High Frequency Crystal positive pin.
I2C0 Serial Clock Line input / output.
I2C0 Serial Data input / output.
LESENSE alternate exite output 0.
LESENSE alternate exite output 1.
LESENSE alternate exite output 5.
LESENSE alternate exite output 6.
LESENSE alternate exite output 7.
LESENSE channel 0.
LESENSE channel 1.
LESENSE channel 13.
LESENSE channel 14.
LESENSE channel 15.
Low Energy Timer LETIM0, output channel 0.
Low Energy Timer LETIM0, output channel 1.
LEUART0 Receive input.
LEUART0 Transmit output. Also used as receive input in half
duplex communication.
Low Frequency Crystal (typically 32.768 kHz) negative pin.
Also used as an optional external clock input pin.
Low Frequency Crystal (typically 32.768 kHz) positive pin.
Pulse Counter PCNT0 input number 0.
Pulse Counter PCNT0 input number 1.
Peripheral Reflex System PRS, channel 0.
2015-03-06 - EFM32TG210FXX - d0012_Rev1.40
48
www.silabs.com