SLWSTK6101B Datasheet, PDF (41/84 Pages) Silicon Laboratories – BGM113 Blue Gecko Bluetooth ® Module Data Sheet

5. Typical Connection Diagrams
BGM113 Blue Gecko Bluetooth ^® Module Data Sheet
Typical Connection Diagrams
5.1 Power, Ground, Debug and Host UART
Typical power supply, ground and MCU debug and host (NCP) UART connections are shown in the figure below.
Note: The Module Reset signal is recommended to be connected to a GPIO line on the Host CPU.
Figure 5.1. BGM113 Connected to a Host CPU with Typical Power Supply, Ground and Debug connections
5.2 SPI Peripheral Connection
The figure below shows how to connect a SPI peripheral device
Figure 5.2. SPI Peripheral Connections
silabs.com | Smart. Connected. Energy-friendly.
Rev. 1.00 | 40