English
Language : 

SI5347-EVB Datasheet, PDF (3/21 Pages) Silicon Laboratories – Powered from USB port or external
◁
Si5347-EVB
2. Si5347-EVB Support Documentation and ClockBuilderPro Software
All Si5347 schematics, BOMs, User’s Guides, and software can be found online at the following link:
http:www.silabs.com/products/clocksoscillators/pages/si538x-4x-evb.aspx
3. Quick Start
1. Install ClockBuilderPro desktop software from EVB support web page given in Section 2.
2. Connect USB cable from Si5347-EVB to PC with ClockBuilderPro software installed.
3. Leave the jumpers as installed from the factory, and launch the ClockBuilderPro software.
4. You can use ClockBuilderPro to create, download, and run a frequency plan on the Si5347-EVB.
5. For the Si5347 data sheet, go to http://www.silabs.com/timing.
4. Jumper Defaults
Table 1. Si5347 EVB Jumper Defaults
Location
JP1
JP2
JP3
JP4
JP5
JP6
JP7
JP8
JP9
JP10
JP13
JP14
JP15
JP16
JP17
JP18
JP19
JP20
JP21
JP22
Type
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
3 pin
3 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
I = Installed
0 = Open
I
O
I
I
O
O
I
O
O
I
O
I
all open
1 to 2
O
O
O
O
O
O
Location
JP23
JP24
JP25
JP26
JP27
JP28
JP29
JP30
JP31
JP32
JP33
JP34
JP35
JP36
JP38
JP39
JP40
JP41
Type
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
2 pin
3 pin
2 pin
2 pin
2 pin
I = Installed
0 = Open
O
O
O
O
O
O
O
O
O
O
O
O
O
O
all open
O
I
I
J36
5x2 Hdr All 5 installed
Refer to the Si5347-EVB schematics for the functionality associated with each jumper.
Rev. 1.1
3
 ▷