|
SI5347-EVB Datasheet, PDF (12/21 Pages) Silicon Laboratories – Powered from USB port or external | |||
|
◁ |
Si5347-EVB
Figure 14. Writing Design Status
After CBPro writes the default plan to the EVB, click on âOpen EVB GUIâ as shown below.
Figure 15. Open EVB GUI
The EVB GUI will appear. Note all power supplies will be set to the values defined in the deviceâs default CBPro
project file created by Silicon Labs, as shown below.
Figure 16. EVB GUI Window
12
Rev. 1.1
|
▷ |