|
SI5347-EVB Datasheet, PDF (11/21 Pages) Silicon Laboratories – Powered from USB port or external | |||
|
◁ |
Si5347-EVB
10.4. Common ClockBuilderPro Work Flow Scenarios
There are three common workflow scenarios when using CBPro and the Si5347 EVB. These workflow scenarios
are:
ï®ï Workflow Scenario #1: Testing a Silicon Labs-Created Default Configuration
ï®ï Workflow Scenario #2: Modifying the Default Silicon Labs-Created Device Configuration
ï®ï Workflow Scenario #3: Testing a User-Created Device Configuration
Each is described in more detail in the following sections.
10.5. Workflow Scenario #1: Testing a Silicon Labs-Created Default Configuration
The flow for using the EVB GUI to initialize and control a device on the EVB is as follows.
Once the PC and EVB are connected, launch ClockBuilder Pro by clicking on this icon on your PCâs desktop.
Figure 11. ClockBuilderPro Desktop Icon
If an EVB is detected, click on the âOpen Default Planâ button on the Wizardâs main menu. CBPro automatically
detects the EVB and device type.
Figure 12. Open Default Plan
Once you open the default plan (based on your EVB model number), a popup will appear.
Figure 13. Write Design to EVB Dialog
Select âYesâ to write the default plan to the Si5347 device mounted on your EVB. This ensures the device is
completely reconfigured per the Silicon Labs default plan for the DUT type mounted on the EVB.
Rev. 1.1
11
|
▷ |