EFM32PG1 Datasheet, PDF (28/94 Pages) Silicon Laboratories – Industrial and factory automation

EFM32PG1 Data Sheet
Electrical Specifications
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Output voltage compliance in I_{COMP_SINK}
RANGESEL1=0, output voltage =
-
0.82
-
%
sink mode, sink current
100 mV
change relative to current
sunk at IOVDD
RANGESEL1=1, output voltage =
-
0.65
-
%
100 mV
RANGESEL1=2, output voltage =
-
0.4
-
%
150 mV
RANGESEL1=3, output voltage =
-
0.25
-
%
250 mV
Note:
1. In IDAC_CURPROG register
2. The IDAC is supplied by either AVDD, DVDD, or IOVDD based on the setting of ANASW in the EMU_PWRCTRL register and
PWRSEL in the IDAC_CTRL register. Setting PWRSEL to 1 selects IOVDD. With PWRSEL cleared to 0, ANASW selects be-
tween AVDD (0) and DVDD (1).
silabs.com | Smart. Connected. Energy-friendly.
Preliminary Rev. 0.31 | 27