SI4700-EVB Datasheet, PDF (26/44 Pages) Silicon Laboratories – Si4700/01/02/03 EVALUATION BOARD USER’S GUIDE

Si4700/01/02/03-EVB
Property
DISABLE
ENABLE
GPIO1 General Purpose I/O 1
GPIO2 General Purpose I/O 2
GPIO3 General Purpose I/O 3
XOSCEN
RDS Status
BLERA
BLERB
BLERC
BLERD
RDSR
RDSS
RDS Control
RDS
Table 10. GUI Properties (Continued)
Description
Powerup Disable
Powerup Enable
General Purpose I/O 1
General Purpose I/O 2
General Purpose I/O 3
Crystal Oscillator Enable - this set-
ting must be selected on the Initial-
ize screen.
Settings
0 = Not active
1 = Initiate Powerdown
0 = Not active
1 = Initiate Powerup
00 = High Impedance
01 = Reserved
10 = Low
11 = High
00 = High Impedance
01 = STC/RDS Interrupt
10 = Low
11 = High
00 = High Impedance
01 = Mono/Stereo Indicator
10 = Low
11 = High
0 = External Clock
1 = On-chip Oscillator
RDS Block A Error Count
RDS Block B Error Count
RDS Block C Error Count
RDS Block D Error Count
RDS Ready
RDS Synchronized
00 = 0 errors
01 = 1–2 errors
10 = 3–5 errors
11 = 6+ errors
00 = 0 errors
01 = 1–2 errors
10 = 3–5 errors
11 = 6+ errors
00 = 0 errors
01 = 1–2 errors
10 = 3–5 errors
11 = 6+ errors
00 = 0 errors
01 = 1–2 errors
10 = 3–5 errors
11 = 6+ errors
0 = No RDS Ready
1 = New RDS Ready
0 = RDS not synchronized
1 = RDS synchronized
RDS Enable
0 = Disable
1 = Enable
26
Rev. 0.9