SI4700-EVB Datasheet, PDF (22/44 Pages) Silicon Laboratories – Si4700/01/02/03 EVALUATION BOARD USER’S GUIDE

Si4700/01/02/03-EVB
6.2.11. Session Preferences Dialog
The session Preferences Dialog is accessed via the top menu ViewSession Preferences. It enables you to
adjust settings that will take effect immediately. The settings will also be used the next time you start the
application. All session preferences are saved in the user.ini file.
1
2
3
4
5
6
7
8
Figure 14. Session Preferences
Table 9. Session Preferences Explanations
#
Name
Explanation(s)
1 Radio Panel Update Rate Select the update rate for the radio panel tab. The default is 0.5 seconds.
2 Reg Map Update Rate
Select the update rate for the register map tab and property grid. This value
must be greater than the GUI Update rate or you will get an error.
3 RDS Error Checking
Select the default method for RDS error checking performed on the baseboard.
For more description, see RDS Error Checking in Table 10.
4 RDS Text Decode
Select the default character set for displaying RDS data.
5 Scan Log After Tune
Delay
Select how many seconds the Tools Log Band Scan feature waits to
determine if the found channel has RDS. If the channel has RDS, then the
RDS Log Delay applies, otherwise it seeks to the next channel.
6 Scan Log RDS Log Delay Select how many seconds are allowed during a Tools Log Band Scan to
gather RDS data, RT time, and PS time. This timer begins when the “After
Tune Delay” expires.
22
Rev. 0.9