|
SI4720-B20-GMR Datasheet, PDF (14/48 Pages) Silicon Laboratories – BROADCAST FM RADIO TRANSCEIVER FOR PORTABLE APPLICATIONS | |||
|
◁ |
Si4720/21-B20
Table 9. FM Receiver Characteristics1,2 (Continued)
(VDD = 2.7 to 5.5 V, VIO = 1.5 to 3.6 V, TA = â20 to 85 °C)
Parameter
Symbol
Test Condition
Min Typ Max
Unit
Audio Output Load Capacitance6,10 CL
Seek/Tune Time6
Powerup Time6
RSSI Offset12
Single-ended
â
RCLK tolerance
â
= 100 ppm
From powerdown
â
Input levels of 8 and
â3
60 dBµV at RF Input
â
50
pF
â
80 ms/channel
â
110
ms
â
3
dB
Notes:
1. Additional testing information is available in Application Note AN388. Volume = maximum for all tests. Tested at
RF = 98.1 MHz.
2. To ensure proper operation and receiver performance, follow the guidelines in âAN383: Antenna Selection and
Universal Layout Guidelines.â Silicon Laboratories will evaluate schematics and layouts for qualified customers.
3. FMOD = 1 kHz, 75 µs de-emphasis, MONO = enabled, and L = R unless noted otherwise.
4. ïf = 22.5 kHz.
5. BAF = 300 Hz to 15 kHz, A-weighted.
6. Guaranteed by characterization.
7. VEMF = 1 mV.
8. |f2 â f1| > 2 MHz, f0 = 2 x f1 â f2. AGC is disabled. Refer to "7. Pin Descriptions: Si4720/21-GM" on page 41.
9. ïf = 75 kHz.
10. At LOUT and ROUT pins.
11. Analog audio output mode.
12. At temperature 25 °C.
14
Rev. 1.0
|
▷ |