SI595 Datasheet, PDF (11/12 Pages) Silicon Laboratories – VOLTAGE-CONTROLLED CRYSTAL OSCILLATOR

DOCUMENT CHANGE LIST:
Revision 0.1 to Revision 0.2
 Updated Table 5, “CLK± Output Phase Jitter,” on
page 4.
Updated typical phase jitter from 0.6 to 0.7 ps for
kV = 380 ppm/V.
Revision 0.2 to Revision 1.0
 Updated 2.5 V/3.3 V and 1.8 V CML output level
specifications in Table 4 on page 3.
 Updated Si595 device to support frequencies up to
810 MHz for LVPECL, LVDS, and CML outputs.
 Separated 1.8 V, 2.5 V/3.3 V supply voltage.
specifications for CML output in Table 3 on page 5.
 Updated Note 1 of Table 5 on page 4 to refer to
AN256.
 Updated Table 8 on page 5 to include the "Moisture
Sensitivity Level" and "Contact Pads" rows.
 Updated Figure 3 and Table 13 on page 9 to reflect
specific marking information.
Revision 1.0 to Revision 1.1
 Swapped D and E values in Table 12 on page 8.
Revision 1.1 to Revision 1.2
 Added Table 9, “Thermal Characteristics,” on
page 5.
Si595
Rev. 1.2
11