|
SI871X Datasheet, PDF (1/35 Pages) Silicon Laboratories – Industrial automation | |||
|
Si871x/2x
5 KV LED EMULATOR INPUT, LOGIC OUTPUT ISOLATORS
Features
ï® High Speed: dc to 15 Mbps
ï® Wide range of product options
ï® 2.5 to 5.5 V logic output
ï¬ï Inverting and non-inverting
ï® Pin-compatible, drop-in upgrades for ï¬ï Disable output high, low or tri-state
popular high-speed digital
ï® 1 channel diode emulator input
optocouplers
ï® Propagation delay 30 ns
ï® Performance and reliability
ï® Up to 5000 VRMS isolation
advantages vs. optocouplers
ï® 10 kV surge withstand capability
ï¬ï Resistant to temperature, age and ï®
forward current effects
ï¬ï 10x lower FIT rate for longer
ï®
AEC-Q100 qualified
Wide operating temperature range
service life
ï¬ï â 40 to +125 °C
ï¬ï Higher common-mode transient ï® RoHS-compliant packages
immunity: >50 kV/µs typical
ï¬ï SOIC-8 (Narrow body)
ï¬ï Lower power and forward input
ï¬ï DIP8 (Gull-wing)
diode current
ï¬ï SDIP6 (Stretched SO-6)
Applications
ï® Industrial automation
ï® Isolated data acquisition
ï® Motor controls and drives
ï® Test and measurement equipment
ï® Isolated switch mode power supplies
Safety Regulatory Approvals (Pending)
ï® UL 1577 recognized
ï¬ï Up to 5000 Vrms for 1 minute
ï® CSA component notice 5A
approval
ï¬ï IEC 60950-1, 61010-1, 60601-1
(reinforced insulation)
ï® VDE certification conformity
ï¬ï IEC60747-5-2/VDE0884-10
(basic/reinforced insulation)
ï® CQC certification approval
ï¬ï GB4943.1
Description
The Si871x/2x isolators are pin-compatible, single-channel, drop-in
replacements for popular optocouplers with data rates up to 15 Mbps.
These devices isolate high-speed digital signals and offer performance,
reliability, and flexibility advantages not available with optocoupler
solutions. The Si871x/2x series is based on Silicon Labs' proprietary
CMOS isolation technology for low-power and high-speed operation and
are resistant to the wear-out effects found in optocouplers that degrade
performance with increasing temperature, forward current, and device
age. As a result, the Si871x/2x series offer longer service life and
dramatically higher reliability compared to optocouplers. Ordering options
include logic output with and without output enable options.
Pin Assignments:
See page 21
NC 1
UVLO
ANODE 2
e
CATHODE 3
8 VDD
7 NC
6 VO
NC 4
5 GND
SOIC-8, DIP8
Industry Standard Pinout
NC 1
8 VDD
UVLO
ANODE 2
e
CATHODE 3
7 EN
6 VO
NC 4
5 GND
SOIC-8, DIP8 with Output Enable
Industry Standard Pinout
ANODE 1
NC 2
e
CATHODE 3
6 VDD
UVLO
5 VO
4 GND
SDIP6
Industry Standard Pinout
Patent pending
Rev. 1.0 8/14
Copyright © 2014 by Silicon Laboratories
Si871x/2x
|
▷ |