|
SI7015-A20 Datasheet, PDF (1/39 Pages) Silicon Laboratories – DIGITAL IC HUMIDITY AND TEMPERATURE SENSOR | |||
|
Si7015-A20
DIGITAL I2C HUMIDITY AND TEMPERATURE SENSOR
Features
ï® Precision Relative Humidity Sensor ï® Drop-In Upgrade for Si7005
ï¬ï ± 4.5% RH (max), 0â80% RH
ï® Factory-calibrated
ï® High-Accuracy Temperature Sensor ï® I2C Interface
ï¬ï ±1 ºC (max), â10 to 85 °C
ï® 0 to 100% RH operating range
ï® Integrated on-chip heater
ï® 4x4 mm QFN package
ï® 0 to +70 °C operating range (FM)
ï® Excellent long term stability
ï® â40 to +85 °C operating range (GM)
ï® Optional factory-installed
ï® Low Voltage Operation (1.9 to 3.6 V)
cover
ï® Low Power Consumption
ï¬ï Low-profile
ï¬ï 150 µA active current
ï¬ï Protection during reflow
ï¬ï 60 nA standby current
ï¬ï Excludes liquids and
particulates
Applications
ï® HVAC/R
ï® Thermostats/humidistats
ï® Instrumentation
ï® White goods
ï® Micro-environments/data centers
ï® Industrial controls
ï® Weather stations
ï® Asset tracking and storage
Description
The Si7015 I2C Humidity and Temperature Sensor is a monolithic CMOS
IC integrating humidity and temperature sensor elements, an analog-to-
digital converter, signal processing, calibration data, and an I2C Interface.
The patented use of industry-standard, low-K polymeric dielectrics for
sensing humidity enables the construction of low-power, monolithic
CMOS Sensor ICs with low drift and hysteresis and excellent long term
stability.
Each unit is factory-calibrated, and the calibration data is stored in the on-
chip non-volatile memory. This ensures that the sensors are fully
interchangeable, with no recalibration or software changes required. The
Si7015 can be used as a drop-in upgrade for the Si7005 with only minor
software changes because the register sets are the same, and the
4x4 mm QFN package is footprint-compatible with that of the Si7005.
The device is compatible with standard SMT assembly processes, such
as reflow. The optional factory-installed cover offers a low profile and
convenient means of protecting the sensor during assembly (e.g., reflow
soldering) and throughout the life of the product, excluding liquids
(hydrophobic/oleophobic) and particulates.
The Si7015 offers an accurate, low-power, factory-calibrated digital
solution ideal for measuring humidity, dew-point, and temperature in
applications ranging from HVAC/R and asset tracking to industrial and
consumer platforms.
Ordering Information
See page 31.
Patent protected; patents pending
Pin Assignments
GND 1
DNC 2
SCL 3
SDA 4
DNC 5
DNC 6
18 DNC
17 DNC
16 DNC
15 CS
14 DNC
13 DNC
Rev. 1.0 1/15
Copyright © 2015 by Silicon Laboratories
Si7015-A20
|
▷ |