ISL6742B Datasheet, PDF (1/20 Pages) Intersil Corporation – Fast current sense to output delay

DATASHEET
Advanced Double-Ended PWM Controller
ISL6742B
The ISL6742B is a high-performance double-ended PWM
controller with advanced synchronous rectifier control and
current limit features. It is suitable for both current- and
voltage-mode control methods.
The ISL6742B includes complemented PWM outputs for
Synchronous Rectifier (SR) control. The complemented
outputs may be dynamically advanced or delayed relative to
the main outputs using an external control voltage.
Its advanced current sensing circuitry employs sample and
hold methods to provide a precise average current signal.
Suitable for average current limiting, a technique which
virtually eliminates the current tail-out common to peak
current limiting methods, it is also applicable to current
sharing circuits and average current mode control.
This advanced BiCMOS design features an adjustable oscillator
frequency up to 2MHz, internal over-temperature protection,
precision dead time control and short propagation delays.
Additionally, multipulse suppression ensures alternating output
pulses at low duty cycles where pulse skipping may occur.
Ordering Information
PART #
(Notes 1, 2, 3)
PART
MARKING
TEMP.
RANGE
(°C)
PACKAGE
(RoHS
PKG.
Compliant) DWG. #
ISL6742BAAZA ISL6742 BAAZ -40 to +105 16 Ld QSOP M16.15A
ISL6742BEVAL3Z Evaluation Board
NOTES:
1. Add “-T” suffix for tape and reel. Please refer to TB347 for details on
reel specifications.
2. These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials,
and 100% matte tin plate plus anneal (e3 termination finish, which
is RoHS compliant and compatible with both SnPb and Pb-free
soldering operations). Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information
page for ISL6742B. For more information on MSL, please see tech
brief TB363.
Features
• Synchronous rectifier control outputs with adjustable
delay/advance
• Adjustable average current signal
• 3% tolerance cycle-by-cycle peak current limit
• Fast current sense to output delay
• Adjustable oscillator frequency up to 2MHz
• Adjustable dead time control
• Voltage- or current-mode operation
• Separate RAMP and CS inputs for voltage feed-forward or
current-mode applications
• Tight tolerance error amplifier reference over line, load, and
temperature
• 175µA start-up current
• Supply UVLO
• Adjustable soft-start
• 70ns leading edge blanking
• Multipulse suppression
• Internal over-temperature protection
• Pb-free (RoHS compliant)
Applications
• Half-bridge, full-bridge, interleaved forward, and push-pull
converters
• Telecom and datacom power
• Wireless base station power
• File server power
• Industrial power systems
Related Literature
• AN1890, “ISL6742BEVAL3Z Power Converter 36V to 75V
Input, 12V Output Up to 10A”
November 3, 2015
1
FN8565.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2014, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.