|
S-24C02BPPHL Datasheet, PDF (9/39 Pages) Seiko Instruments Inc – 2-WIRE CMOS SERIAL E2PROM | |||
|
◁ |
Rev.2.2_00
2-WIRE CMOS SERIAL E2PROM
S-24C02BPPHL
 Operation
1. Start condition
When the SDA line changes from âHâ to âLâ with the SCL line at âHâ, the device is in the start condition.
All operations begin from the start condition.
2. Stop condition
When the SDA line changes from âLâ to âHâ with the SCL line at âHâ, the device is in the stop condition.
When the device receives the stop condition signal during a read sequence, the read operation is
interrupted, and the device enters standby mode.
When the device receives the stop condition signal during a write sequence, the retrieval of write data is
halted, and rewriting the E2PROM starts.
tSU.STA tHD.STA
tSU.STO
SCL
SDA
Start condition
Stop condition
Figure 6 Start/Stop Condition
Seiko Instruments Inc.
9
|
▷ |