S93L76A Datasheet, PDF (17/37 Pages) Seiko Instruments Inc – LOW VOLTAGE OPERATION 3-WIRE SERIAL E2PROM

Rev.6.0_02
2. 2 Output pin
LOW VOLTAGE OPERATION 3-WIRE SERIAL E²PROM
S-93L76A
V_CC
DO
Figure 17 DO Pin
3. Input pin noise elimination time
The S-93L76A has a built-in low-pass filter at the SK pin, the DI pin and the CS pin to suppress noise. If the supply
voltage is 5.0 V, noise with a pulse width of 20 ns or less at room temperature can be suppressed by the low-pass
filter.
Note that noise with a pulse width of more than 20 ns is recognized as a pulse since the noise can not be
suppressed if the voltage exceeds VIH / VIL.
 Precaution
● Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
● SII Semiconductor Corporation claims no responsibility for any and all disputes arising out of or in connection with any
infringement of the products including this IC upon patents owned by a third party.
17